With the help of a smart plug, Philips Hue lights can be controlled remotely. Using your smartphone or tablet you will find it easy to set up and use. Consumers report that these devices are very user-friendly for everyday tasks
The “merkury smart wifi plug app” is a new product that helps you to control your home appliances. It’s easy to set up and use, and it works with most of the major smart home systems.
Setup of Merkury Smart Plugs
The Merkury Smart Plug allows you to operate appliances like coffee makers and lighting from your smartphone without the requirement of a home automation bridge or hub.
The Merkury Smart Plug is not just one of the tiniest smart plugs we’ve seen, but also one of the most affordable. Furthermore, you may turn it on and off using Amazon Alexa, Cortana, or Google Assistant voice instructions.
The Merkury smart plug has a three-prong socket on the front and a three-prong plug on the rear that is well-positioned to avoid blocking the second outlet on a twin power outlet receptacle.
A backlit on/off button and a Wi-Fi indicator light that flickers bright blue during setup and solid blue when connected are located on the left side.
Let’s have a look at how to set up this smart plug, as well as some frequently asked questions concerning the Merkury smart plug.
Before you install the Merkury Smart Plug, there are a few things you should know.
- Know your Wi-Fi passwords (name and password).
- Ascertain that your smartphone is running Android 4.1 or iOS 8 or later.
- Make sure the Merkury Smart Wi-Fi plug is connected to a 2.4 GHz Wi-Fi network; it will not connect to a 5 GHz Wi-Fi network.
The Procedure for Setup
Install the Companion App.
- Begin by downloading the Geeni companion app for your Merkury Smart Wi-Fi plug from iOS or Google Play, depending on whether you have an iPhone or an Android smartphone.
Download the Merkury Companion App to set up your Merkury Smart Plug.
Create an account and log in to the app.
- Launch the Geeni companion app when it has been downloaded and go to the ‘Register’ option.
- After that, enter your phone number, beginning with the country code, or your email address.
- After that, input the verification code that was issued to your phone number or email address.
- Make a passcode and double-check it by entering it again.
- Finally, open the Geeni app and log in.
Setup for Merkury Smart Plugs: Create an account and log in to the app.
Reset the Smart Plug after connecting it.
- Connect the smart plug to a power outlet and check that the notification light on the smart plug is blinking blue, indicating that the plug is ready to use.
- Begin by launching the Geeni app and adding your smart plug.
- You may use the ‘Easy’ or ‘AP’ modes to add your smart plug.
Setup of Merkury Smart Plugs: Connect and Reset the Smart Plug
Easy Mode
- Turn on the smart plug and check if the notification light is rapidly flashing.
- Click the addition (+) icon in the upper corner of the ‘Devices’ tab in the app.
- Then choose ‘Smart Power.’
- Make sure the smart plug’s light is quickly blinking blue, indicating that it’s ready to connect using Easy Mode. If it doesn’t, press and hold the power button for approximately 3 seconds until the light begins to blink rapidly, then hit ‘Yes, it’s blinking fast.’
Easy Mode for Merkury Smart Plug Setup
- After that, enter your Wi-Fi password (name and password).
- At this point, the app will make an attempt to connect to your plug.
Easy Mode for Merkury Smart Plug Setup
AP Mode
- Turn on the smart plug and check if the notification light is rapidly flashing.
- Click the addition (+) icon in the upper corner of the ‘Devices’ tab in the app.
- Then choose ‘Smart Power.’
- Then, in the upper right corner of your screen, choose ‘AP Mode.’
- Enter your Wi-Fi credentials after clicking ‘Next.’
AP Mode Merkury Smart Plug Setup
- Pick your smart plug from the list of Wi-Fi networks by following the steps.
- Your smart plug will now be connected to Wi-Fi.
AP Mode Merkury Smart Plug Setup
FAQs
Is it Possible to Combine Several Merkury Smart Plugs?
Yes, you can organize several smart plugs by location, room, or whatever else you choose.’ For example, you may create a group for ‘Kitchen’ and another for ‘Entire House,’ and your kitchen smart plugs will appear in both.
Is there a limit to how many Merkury Smart Plugs I can connect?
The Geeni companion app has the ability to operate an endless number of smart plugs in different places. However, keep in mind that the number of linked devices may be limited by your router.
What is the procedure for renaming my Merkury Smart Plug?
From the main device list, choose the smart plug you wish to rename and then click ‘Modify Device Name.’ You’ll now be able to type in a name that is more recognizable to you.
What Can I Do If My Smart Plug Isn’t Working?
Check that your Wi-Fi router is turned on and within range. Additionally, verify that your smart plug is running the most recent Geeni software by clicking on ‘Check for firmware update.’
Last Thoughts
Overall, smart plugs are simple to set up, even if you aren’t tech-savvy.
Simply plug them into a wall outlet, download the accompanying app, and carefully follow the on-screen instructions, and your smart plug should be up and running in no time.
See Also
Reseting a TP-Link Smart Plug
Unresponsive Amazon Plug
How to Configure a TP-Link Smart Plug
How to Make a Wemo Smart Plug Work
How to Make a Smart Plug Work with Alexa
How to Connect Alexa to the Internet through Wifi
How to Pair Alexa with a Bluetooth Device
How to Make Alexa Work with Your iPhone
Alexa-enabled smart thermostat
Merkury Smart Plug Setup
Watch This Video-
The “merkury smart plug not connecting” is a problem that has been present for a while. The solution to this problem is to set up the smart plug correctly.
Frequently Asked Questions
Why is my Geeni plug not connecting?
A: The Geeni plug needs to be plugged into the power outlet with a USB port before it can charge.
How do you use merkury smart plug?
A: To use a merkury smart plug, you must first download the app for your device. Then connect to Wi-Fi or wired internet connection and wait until it is fully charged before using AC power. Once connected, press the power button on the side of your device to start using AC power as needed!
Why is my Geeni smart plug not working?
A: Geeni has a built in feature that turns it off when plugged into an outlet. If you find your smart plug is not working, make sure the switch on the bottom of your device is set to off
Related Tags
- merkury smart plug with usb
- merkury smart plug reset
- merkury innovations smart plug 2-pack
- merkury smart wifi plug review
- merkury smart plug work with alexa
