Fix Critical Process Died BSoD error in Windows 11

Milan Stanojevic is a writer who lives in Belgrade, Serbia.

Windows & Software Expert

Milan has been fascinated by computers since he was a kid, and this has led him to be interested in all PC-related technology. He worked as a front-end web developer before joining WindowsReport. Continue reading

• The most common reason of Critical Process Died on Windows 11 is system corruption, therefore try using SFC and DISM to restore your system.
• Incompatible drivers are also a frequent cause of problems; thus, locate and delete the incompatible drivers, or update them.
• If you’re receiving a Critical Process Died error while utilizing an SSD, make sure the disk isn’t broken.

We suggest Restoro PC Repair Tool to repair a variety of PC issues: This program will fix common computer problems, protect you against file loss, viruses, and hardware failure, and optimize your PC to run at its best. In three simple actions, you can immediately fix PC problems and eliminate viruses:

1. Download the Restoro PC Repair Tool, which includes patent-pending technologies (patent available here).
2. To identify Windows faults that may be causing PC difficulties, click Start Scan.
3. To address problems that are impacting your computer’s security and performance, click Repair All.

• This month, 0 readers have downloaded Restoro.

Blue Screen of Death mistakes are among the most frustrating and difficult to resolve problems that may arise on your computer.

When attempting to start into Windows 11, the Critical Process Died issue may arise at any time.

Because it’s not always simple to identify the source of the problem, fixing it may take some time. In certain cases, the typical reasons are linked to your drivers or hardware, although there are exceptions.

To make matters worse, these problems will cause your computer to crash and reboot unexpectedly, resulting in the loss of any unsaved data.

What should you do if you receive a Blue Screen of Death?

The Blue Screen of Death, also known as a halt error, is a system error that displays when a catastrophic system mistake occurs.

If you ever have this problem, it indicates your system has crashed and your computer is no longer functional.

When your system crashes, it will be forced to restart. Regrettably, this implies that any data you haven’t saved will be lost. This is why it’s critical to correct these mistakes as quickly as possible.

What causes Blue Screen of Death errors?

Hardware problems may cause BSoD faults. Consider software problems as a possible source of trouble. Most likely, we’re talking to problems with compatibility with certain apps or drivers.

This issue may also be caused by missing system files, as is the case with the Critical Process Died error on Windows.

Malware and faulty BIOS upgrades may also cause BSoD problems on your computer. Loose connections or hardware failures are the most frequent hardware reasons of system crashes.

Check out our in-depth guide on Blue Screen of Death causes for more information.

Rest assured that there are solutions to this issue, and we’ll show you how to repair the Critical Process Died error in Windows 11 straight now.

How can I solve Windows 11’s Critical Process Died error?

2. Switch to Safe Mode

NOTE

While entering Safe Mode will not solve the issue, if you are unable to boot to your system, you must use the techniques provided while in Safe Mode.

1. Allow your computer to restart a few times throughout the boot process. Alternatively, on the login screen, click the Power button, hold Shift, and choose Restart.
2. Choose Troubleshoot from the drop-down menu.
3. Now go to the Advanced settings section.
4. Go to the Startup settings page.
5. After that, press the Restart button.
6. To enter Safe Mode with Networking, press 5 on your keyboard.

Do you need additional ways to go into Safe Mode? Check out our article for the best methods to start Windows 11 in Safe Mode in this instance.

3. Use the built-in troubleshooters to troubleshoot any issues.

1. Select Settings from the Start Menu.
2. In the right pane, go to Troubleshoot.
3. Other troubleshooters should be selected.
4. Run a few troubleshooters to see whether they were successful in resolving the issue.

Some unexpected, transient issues may be to blame if your Windows 11 Start menu isn’t functioning. In this situation, we have a tutorial devoted to resolving the Start menu problems in Windows 11 as soon as possible.

4. Make use of SFC and DISM.

1. Select Windows Terminal by pressing Windows Key + X. (Admin).
2. Now type sfc /scannow at the command prompt.
3. Wait for the scan to complete, then restart your computer to see whether the issue persists.
4. If the problem persists, restart the Terminal and perform the following commands: Dism /Online /Cleanup-Image /CheckHealth Dism /Online /Cleanup-Image /ScanHealth Dism /Online /Cleanup-Image /RestoreHealth Dism /Online /Cleanup-Image /RestoreHealth Dism /Online /Cleanup-Image /RestoreHealth

5. Uninstall any updates that are causing problems.

NOTE

To solve the issue, you may need to repeat this process for several upgrades.

1. Enter appwiz.cpl by pressing Windows Key + R. Click the OK button.
2. Select View installed updates from the drop-down menu.
3. Remove the update by double-clicking it.

6. Windows 11 should be reset.

NOTE

This is an easy procedure, but if you want to do so, make sure you back up all of your critical data beforehand.

1. To access Settings, press Windows Key + I.
2. Select Recovery from the System drop-down menu.
3. Now press the Reset PC key.
4. Choose the appropriate option. Remove everything is preferable in most instances, but if you do so, make sure you back up your data beforehand.
5. Choose the kind of reinstall you’d want. The Local reinstall was utilized.
6. Verify your reinstall options.
7. To begin the procedure, click Reset.
8. To complete it, follow the directions on the screen.

Check out our step-by-step guide on how to reset Windows 11 for more information.

What exactly is a minidump file, and where can I get one?

When your computer crashes, it remembers the events that led to the crash and records them in a minidump, commonly known as a DMP file.

The minidump file is a crash record that contains essential information that may assist you in diagnosing the issue and determining the source of the BSoD.

In terms of location, the minidump files may be found in the following directory: C:WindowsMinidump

The MEMORY.DMP file may also be used for diagnostics, although it typically includes more information that isn’t necessary.

What options do I have for changing my system crash settings?

1. Using the Windows Key + R keyboard shortcut, type sysdm.cpl and hit Enter.
2. Select Settings from the Startup and Recovery section of the Advanced menu.
3. You may now adjust the parameters as required. The default settings should appear as seen in the picture below:
4. Optional: You may wish to deactivate Automatically restart to read the name of the stop code more clearly.

Fixing BSoD issues like Critical Process Died on Windows 11 may be difficult, but we hope you found our post helpful and were able to resolve the issue.

Damaged system files are typically the source of this issue, so be sure to examine your system and fix it if necessary.

Also, don’t forget to check your drivers and, if necessary, update them. These suggestions also apply if you get the Critical process died in Windows 10 error.

Have you come up with a solution on your own? Please tell us about it in the comments area below.

Was this page of assistance to you?

Thank you very much!

There are insufficient details It’s difficult to comprehend Other Speak with a Professional

Start a discussion.

Frequently Asked Questions

How do I fix the error critical process died?

This error is caused by a corrupted installation of Beat Saber. To fix this, you will need to reinstall the game.

What causes BSOD critical process died?

BSOD is an acronym for Blue Screen of Death, which is a term used to describe the appearance of a blue screen on a computer. It can be caused by many different things, including hardware or software issues.

How do I fix critical process died boot loop?

There are a few things you can try. First, try to boot into safe mode and see if that helps. If it does not, then you will need to reinstall the operating system.